manualshive.com logo in svg

Danfoss LX205T, Руководство пользователя, Страница: 52 / 63

Поделиться
Скачать
Danfoss LX205T Скачать руководство пользователя страница 52

PaGE 52

© 2015 OJ Electronics A/S

10.4.3 Sensor Application 1/2 

This option allows you to choose which sensor is used to control the heating 
system.

•  Floor:  

With this setting, the floor sensor controls the heating system.

•  Room/Floor  Protection: With this setting, the room sensor controls the heating 

system while the floor sensor limits heating according to the 
temperature limits set under Menu/Installer Settings/Floor Protection.

•  Room:  

 With this setting, the room sensor built into the thermostat controls 
the heating system.

   

 Note! Floor Protection is not active while using the Sensor Application 
“Room”.

   

 Note that certain menu options will be grayed out and inaccessible as 
they are only applicable with the floor sensor.

•  Regulator:   With this setting, the thermostat operates as a regulator and no 

sensors are used. The setting is a percentage of the full load in steps 
of 10%. 

   

 Note that Floor Protection is not active when using the thermostat as 
a regulator.

Floor limit temperatures are set under 

menu/Installer settings/floor Protection

.

Note that changes made under “Sensor Application” do not influence the “Floor 
Protection” settings.

>

<

Contents

Содержание LX205T
































































Отзывы:

Нет отзывов