![background image](http://html1.mh-extra.com/html/danfoss/h1p-069/h1p-069_service-manual_3692273065.webp)
P106 497E
D250
Electric control
mounting bolt
E350
Servo can locking bolt
L010 Pressure limiter adjusting screw
L024 Pressure limiter locking nut
L028 Pressure limiter plug (special)
L012 Pressure limiter cartridge
D015 Neutral adjusting screw
D060 Neutral adjust locking nut
D050 Coil mounting bolt
B015 O-ring plug, 7/16 - 20
G302 O-ring plug, 5/16 - 24 UNF
G300 O-ring plug, 9/16 - 18
B035 O-ring plug, see table
G250 O-ring plug, 9/16 - 18
G302 O-ring plug
5/16 - 24 UNF
D065 O-ring plug, 7/16 - 20
B020 O-ring plug
1-1/16 - 12
Fastener Size and Torque Chart
H1P 069—280
Item
Fastener
Wrench size
Torque
D015
Neutral adjust screw
4 mm internal hex
NA
D050
Coil mounting bolt
4 mm internal hex
8 N•m [6 lbf•ft]
D060
Neutral adjust locking nut
13 mm
10 N•m [7 lbf•ft]
D200
Swash plate feedback pin (not shown)
13 mm deep well socket
25 N•m [18 lbf•ft]
D250
Electric control mounting bolt
5 mm internal hex
13.3 N•m [9.8 lbf•ft]
E350
Servo can locking bolt
10 mm
14.5 N•m [11 lbf•ft]
T015
Filter mounting bolt
24 mm
21 N•m [15 lbf•ft]
T025
Filter adapter gage plug
6 mm internal hex
18 N•m [13 lbf•ft]
V010
Charge pressure cartridge
22 mm
52 N•m [38 lbf•ft]
V020
Charge pressure adjusting screw
4 mm internal hex
NA
V022
Charge pressure locking nut
13 mm
19 mm (210/250/280)
12 N•m [9 lbf•ft]
Service Manual
H1P 069—H1P 280 Axial Piston Single Pumps
Torque Chart
©
Danfoss | January 2021
AX152886482551en-000601 | 65