Specifications
Option
H1
Spline
11 teeth, 16/32 pitch
Maximum torque
1)
296 N•m [2620 lbf•in]
1)
For definitions of maximum and rated torque values, refer to
Basic Information
11062168, section Shaft Torque
Ratings and Spline Lubrication.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
H1P Auxiliary mounting, option H3 (SAE B, 13 teeth)
Option H3, ISO 3019-1, flange 101-2 (SAE B, 13 teeth)
4x M 12 x1.75-6H THD
19.75 min THD depth
2x 146 ±0.35
2x 73 ±0.175
1.956 ±0.076
11.4 ±0.25
Mating shaft shoulder must
Not protrude beyond this point
Mating shaft must not
Protrude beyond this point
R0.8 MAX
∅
101.651
+0.076 0
∅
107.823
+0.13 0
Note:
bolt length
greater than
19.75 mm could
result in a leak or
damage to the unit
Paint free
Auxiliary mounting pad
For mating flange 101-2
Per ISO 3019-1 (SAE B)
O-ring seal required
Ref
∅
94.92 id x 2.62 cross section
14.5 Min
Shaft clearance
57.2 Min
Shaft clearance
Spline data
Number of teeth : 13
Pitch fraction
: 16/32
Pressure angle : 30°
Pitch
∅
:
∅
20.638
Type of fit
: fillet root side
Per
: ANSI B92.1b CLASS 7e
239.6 ±2.5
P700 33 320-45
Specifications
Option
H3
Spline
13 teeth, 16/32 pitch
Maximum torque
1)
395 N•m [3500 lbf•in]
1)
For definitions of maximum and rated torque values, refer to
Basic Information
11062168, section Shaft Torque
Ratings and Spline Lubrication.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
Technical Information
H1 Axial Piston Single Pumps, Size 045/053
Dimensions
44 |
©
Danfoss | May 2017
11063344 | BC00000059en-US1001
