H1P Auxiliary mounting, option H2 (SAE A, 9 teeth)
Option H2, ISO 3019-1, flange 82-2 (SAE A, 9 teeth)
Paint free
4x M10 x1.5-6H THD
15 min THD depth
2x 106.4 ±0.35
2x 53.2 ±0.175
Auxiliary mounting pad
For mating flange 82-2
Per ISO 3019-1 (SAE A)
1.956 ±0.076
8.1 ±0.25
Mating shaft shoulder must
Not protrude beyond this point
Mating shaft must not
Protrude beyond this point
R0.8 max
∅
82.601
+0.076 0
∅
88.621
+0.13 0
O-ring seal required
Ref
∅
82.22 ID x 2.62 cross section
P700 33 318-45
14.5 MIN
Shaft clearance
57.2 MIN
Shaft clearance
Spline data
Number of teeth : 9
pitch fraction : 16/32
Pressure angle : 30°
Pitch
∅
:
∅
14.288
Type of fit
: fillet root side
Per
: ANSI B92.1b CLASS 7e
239.6 ±2.5
Specifications
Option
H2
Spline
9 teeth, 16/32 pitch
Maximum torque
1)
162 N•m [1430 lbf•in]
1)
For definitions of maximum and rated torque values, refer to
Basic Information
11062168, section Shaft Torque
Ratings and Spline Lubrication.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
H1P Auxiliary mounting, option H1 (SAE A, 11 teeth)
Option H1, ISO 3019-1, Flange 82-2 (SAE A, 11 Teeth)
Paint free
4x M10x1.5-6H THD
15 min THD depth
2x 106.4 ±0.35
2x 53.2 ±0.175
1.956 ±0.076
8.1 ±0.25
Mating shaft shoulder must
Not protrude beyond this point
Mating shaft must not
Protrude beyond this point
R0.8 max
∅
82.601
+0.076 0
∅
88.621
+0.13 0
Auxiliary mounting pad
For mating flange 82-2
Per ISO 3019-1 (SAE A)
O-ring seal required
Ref
∅
82.22 ID x 2.62 cross section
14.5 min
Shaft clearance
57.2 min
Shaft clearance
Spline data
Number of teeth : 11
Pitch fraction
: 16/32
Pressure angle : 30°
Pitch
∅
:
∅
17.4625
Type of fit
: fillet root side
Per
: ANSI B92.1b CLASS 7e
239.6 ±2.5
P700 33 319-45
Technical Information
H1 Axial Piston Single Pumps, Size 045/053
Dimensions
©
Danfoss | May 2017
11063344 | BC00000059en-US1001 | 43
