![background image](http://html1.mh-extra.com/html/danfoss/fc-302/fc-302_instruction-manual_3482233044.webp)
FC 300 Instruction Manual
How to Program
3-41 Ramp 1 Ramp-up Time
Range:
0.01 - 3600.00 s
*
ExpressionLimits
Function:
The ramp-up time is the acceleration time from 0
RPM to the rated motor speed nM,N (par. 1-23),
provided that the output current does not reach
the torque limit (set in par. 4-16). The value 0.00
corresponds to 0.01 s in speed mode.
3-42 Ramp 1 Ramp-down Time
Range:
0.01 - 3600.00 s
*
ExpressionLimits
Function:
The ramp-down time is the deceleration time from
the rated motor speed n
M,N
(par. 1-23) to 0 RPM,
provided that there is no over-voltage in the inverter
due to regenerative operation of the motor, or if the
generated current reaches the torque limit (set in
par. 4-17). The value 0.00 corresponds to 0.01 s in
speed mode. See ramp-up time in par. 3-41
*
default setting
( )
display text
[ ]
value for use in communication via serial communication port
44
MG.33.A4.22 - VLT is a registered Danfoss trademark
Содержание FC 302
Страница 34: ...FC 300 Instruction Manual How to Install 34 MG 33 A4 22 VLT is a registered Danfoss trademark...
Страница 74: ...FC 300 Instruction Manual Troubleshooting 74 MG 33 A4 22 VLT is a registered Danfoss trademark...
Страница 77: ...FC 300 Instruction Manual Index 4 485 V DC 63 77 MG 33 A4 22 VLT is a registered Danfoss trademark...