Danfoss FC 300 Profibus, Руководство пользователя

Страница: 59 / 85

FC 300 Profibus
Parameters
PROFIdrive profile [1]
Function:
Selects the interpretation of the control and status
words. The installed option in slot A determines the
valid selection.
8-50 Coasting Select
Option:
Digital input [0]
Bus [1]
Logic AND [2]
*
Logic OR [3]
Function:
Allows a choice between controlling the coasting
function via the terminals (digital input) and/or via
the bus.
NB!:
This parameter is active only when par.
8-01 Control Site is set to [0] Digital and
control word .
8-51 Quick Stop Select
Option:
Digital input [0]
Bus [1]
Logic AND [2]
*
Logic OR [3]
Function:
Allows a choice between controlling the Quick stop
function via the terminals (digital input) and/or via
the bus.
NB!:
This parameter is active only when par.
8-01 Control Site is set to [0] Digital and
control word .
8-52 DC Brake Select
Option:
Digital input [0]
Bus [1]
Logic AND [2]
*
Logic OR [3]
Function:
Allows a choice between controlling the DC brake
via the terminals (digital input) and/or via the bus.
NB!:
This parameter is active only when par.
8-01 Control Site is set to [0] Digital and
control word .
8-53 Start Select
Option:
Digital input [0]
Bus [1]
Logic AND [2]
*
Logic OR [3]
Function:
Choose between controlling the drive via the
terminals (digital input) and/or via the bus.
If you select Bus , you can only activate the
Start command if it is transmitted via the serial
communication port or fieldbus option. If you select
Logic AND , you must also activate the command via
one of the digital inputs. If you select Logic OR , you
can also activate the Start command via one of the
digital inputs.
NB!:
This parameter is active only when par.
8-01 Control Site is set to [0] Digital and
control word .
8-54 Reversing Select
Option:
Digital input [0]
Bus [1]
Logic AND [2]
*
Logic OR [3]
Function:
Choose between controlling the drive via the
terminals (digital input) and/or via the bus.
If you select Bus , you can only activate the
Reversing command if it is transmitted via the serial
communication port or fieldbus option. If you select
Logic AND , you must also activate the command via
one of the digital inputs. If you select Logic OR ,
you can also activate the Reversing command via
one of the digital inputs.
NB!:
This parameter is active only when par.
8-01 Control Site is set to [0] Digital and
control word .
59
MG.33.C2.02 - VLT is a registered Danfoss trademark