6.3 Knife replacement
WARNING!
Cutting risk!
Knife replacement imposes a significant risk of injuries to the
hands.
• Always wear cut-proof gloves when replacing the knives.
1.
Complete the cutting process.
2.
Deposit the workpiece outside the machine.
3.
Disconnect the machine from the power supply.
4.
Loosen the four nuts on the cover plate.
5.
Remove the cover plate.
6.
Hold the drive shaft (3) using a pin punch (4) and loosen the nut
(2) counterclockwise using a jaw or ring wrench SW 30.
7.
Remove the knife (1) and the washer (5) from the axle and posi-
tion them carefully.
8.
Mount a new knife - observe cutting direction.
9.
Position the washer (5) and tighten the nut (2).
10. Remount in the reverse order.
Содержание ET9400
