5.6 Adjusting the skiving knife USM 10.2 EcoLine / USM 10.2
5.6.1 Adjusting the inside skiving length and inside skiving diameter
1.
Deactivate the machine on the power switch and secure it
against unintentional restart.
2.
Open the protection cover.
3.
Loosen the hexagon socket threaded pin (4) on the adjusting
ring (5).
4.
Turn the adjusting ring (5) to adjust the skiving depth to the re-
quired length.
5.
Tighten the hexagon socket threaded pin (4) on the adjusting
ring (5).
WARNING!
Cutting risk!
There is an acute risk of injuries to the hands when the skiving
knives are adjusted.
• Always wear protective gloves when changing the skiving
knives.
6.
Loosen the hexagon socket threaded pin (3) and set the inside
skiving knife (1) to the required diameter.
Содержание ET6100
