EM-PMI540-T4000 options
Variant
Code
Description
Additional information
High voltage connections
-DUAL
Two galvanically isolated 3
phase systems
Two connection boxes each containing
one 3 phase system with one M32 cable
gland per phase
-QUAD
Four galvanically isolated 3
phase systems
Four connection boxes each containing
one 3 phase system with one M32 cable
gland per phase
Bearing insulation
*
Non-insulated bearings
Non-insulated bearings
+BIN
Insulated bearing in N-end
Insulated bearing in N-end
+BIA
Insulated bearing in both
ends
Insulated bearing in both ends
Shaft grounding
*
None
+SG1
D-end shaft grounding
In-built grounding ring
Rotation sensor (resolver)
*
None
No resolver
+RES1
Resolver
In-built non contacting resolver, 8-pole
pair
Winding temperature
sensor
*
Temperature surveillance
6 x PT100 in the windings
+TEMP4
Redundant temperature
surveillance
12 x PT100 in the windings
Bearing temperature sensor *
None
+BTMP1
PT100 in bearings
Plug-in connector
Anti-condensation heaters
*
None
+HEAT2
Two anti-condensation
heaters
2 x 230VAC/130W
Marine classification
*
No marine classification
+CL1
ABS American Bureau of Shipping
+CL2
BV Bureau Veritas
+CL3
DNV
+CL4
LR Lloyd’s Register
+CL5
RINA
+CL6
CCS China Classification Society
Conformity according to standards
The electric machine has been designed to be in conformity with the following directives and to meet the
requirements specified in the following standards:
Applicable Directives and standards
Standard
Explanation
Low Voltage Directive
2006/95/EC (until 19.4.2016)
and Low Voltage Directive
2014/35/EU (from 20.4.2016
onwards)
Electrical equipment means any equipment designed for use with a voltage
rating of between 50 and 1000 V for alternating current. This electric
machine is subject to the Low Voltage Directive 2006/95/EC or 2014/35/EC.
IEC 60034-1:2010
Rotating electrical machines - Part 1: Rating and performance
IEC 60034-5:2001/A1:2007
Rotating electrical machines - Part 5: Degrees of protection provided by the
integral design of rotating electrical machines (IP code) - Classification
IEC 60034-6:1991
Rotating electrical machines - Part 6: Methods of cooling
User Guide
EM-PMI540-T4000
General information
6 |
©
Danfoss | April 2023
BC265857716810en-000202
