Overview of electric machine system
Connections and interfaces
The electric machines are connected mechanically and electrically as a part of a machinery or as a part of
a power generation equipment.
Mechanical interfaces:
•
Lifting points.
•
Flange mounting (D-end).
•
Mounting foot rails.
•
Shaft connection.
•
Cooling system connections (bores).
•
Grease escape/fill connections; depending on option (+BHS); maintenance use only.
•
Air ventilation plug.
•
Vibration sensor connection points.
Electrical interfaces:
•
Power connections through the connection box.
•
Measurement connector (connection through the connection box).
•
Anti-condensation heater connection (+HEAT1 option) (through the connection box).
•
Bearing temperature connectors (+BTMP1 option).
•
Leakage sensor connectors.
User Guide
EM-PMI540-T2000
Product overview
16 |
©
Danfoss | July 2021
BC265857530809en-000202