EM-PMI300-T310 options
Variant
Code
Description
Additional information
Low voltage connections
*
Low voltage connections
done with connector
TYCO TE 1-1564520-1 connector for LV
connections
+LVB1
Low voltage connections
done with connection box
and terminal strip
Connection box with 2x M25 cable glands
(reserve 2x plugged M16 threads
available) and terminal block for LV
connections
N-end attachment
*
None
+NE1
Flange
SAE 4 mating transmission housing
+NE2
Male shaft + Flange
DIN5480 W50x2 SAE 4 mating
transmission housing
Bearing lubrication and
mounting direction
*
Greased for life
Deep groove ball bearing, contact seal on
both sides, any mounting direction (see
user guide for details)
+BHS
Grease lubricated
Deep groove ball bearing, open design,
horizontal mounting direction (see user
guide for details)
Bearing insulation
*
Non-insulated bearings
Non-insulated bearings
+BIN
Insulated bearing in N-end
Insulated bearing in N-end
+BIA
Insulated bearing in both
ends
Insulated bearing in both ends
Rotation sensor (resolver)
*
None
No resolver
+RES1
Resolver
In-built non contacting resolver, 6-pole
pair
Winding temperature
sensors
*
Temperature surveillance
3 x PT100 (two wire) in windings
+TEMP4
Redundant temperature
surveillance
6 x PT100 (two wire) in windings (requires
+LVB1)
Anti-condensation heaters
*
None
No anti-condensation heater
+HEAT1
One anti-condensation
heater
230VAC/65W (reLVB1)
Marine classification
*
No marine classification
+CL1
ABS American Bureau of Shipping
+CL2
BV Bureau Veritas
+CL3
DNV
+CL4
LR Lloyd’s Register
+CL5
RINA
+CL6
CCS China Classification Society
Conformity according to standards
The electric machine has been designed to be in conformity with the following directives and to meet the
requirements specified in the following standards:
User Guide
EM-PMI300-T310
General information
6 |
©
Danfoss | April 2023
BC265858156812en-000202
