Danfoss EM-PMI240, Руководство пользователя

Страница: 37 / 59

Table 10. Pin con guration of the Deutch HD34-24-47PE connector
Measurement Description PIN
Temperature 1
Temperature 1, PT100 (P), windings 47
Temperature 1, PT100 (N), windings 46
Temperature 2
Temperature 2, PT100 (P), windings 33
Temperature 2, PT100 (N), windings 32
Temperature 3
Temperature 3, PT100 (P), windings 45
Temperature 3, PT100 (N), windings 31
Temperature 4
Temperature 4, PT100 (P), windings, option TEMP4 30
Temperature 4, PT100 (N), windings, option TEMP4 29
Temperature 5
Temperature 5, PT100 (P), windings, option TEMP4 44
Temperature 5, PT100 (N), windings, option TEMP4 43
Temperature 6
Temperature 6, PT100 (P), windings, option TEMP4 28
Temperature 6, PT100 (N), windings, option TEMP4 16
Resolver COS_N Resolver, RES_COS_N, in-built non contacting 35
Resolver COS_P Resolver, RES_COS_P, in-built non contacting 20
Resolver SIN_N Resolver, RES_SIN_N , in-built non contacting 36
Resolver SIN_P Resolver, RES_SIN_P , in-built non contacting 21
Resolver EXCN Resolver, EXCN, in-built non contacting 22
Resolver EXCP Resolver, EXCP, in-built non contacting 10
Resolver shield Resolver, SHIELD/GROUND, in-built non contacting 34
Grounding connections
Ground the electric machine from its frame to make sure it functions correctly.
It is recommended to perform a ground bond test after installing the electric machine to ensure sufficient grounding.
The grounding points on the frame of the electric machine are for safety grounding, and signal cables and power cable
shields have their own grounding points.
EM-PMI240
6. Installation
36 |
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020
| BC355256345493en-000103