Choosing a heat curve slope
The heat curves represent the desired flow temperature at different outdoor temperatures and at a desired room temperature of 20 °C.
The small arrows ( ) indicate 6 different outdoor temperature values at which you can change the heat curve.
The desired flow temperature is set in 'Des. T comfort' and 'Des. T
saving'. Set values for comfort mode could for example be 7.5 °C
and for saving mode 25 °C.
Alternatively the desired flow temperature can be set by applying
an external signal. The choice is set in 'Ext. signal'.
Parameters indicated with an ID no. like "1x607" mean a universal
parameter.
x stands for circuit / parameter group.
64 | © Danfoss | 2017.05
VI.LG.H4.02
Operating Guide ECL Comfort 210/296/310, application A230