Danfoss EC-C1200-450, Руководство пользователя

Страница: 5 / 69

This user guide contains the installation, operation and maintenance instructions for the EC-
C1200-450 electrical converter.
Copyright
Danfoss Oy. All rights reserved.
No parts of this user guide may be reproduced or transmitted in any form or by any means,
electrical or mechanical including photocopying, recording or by an information storage or
retrieval system, without permission in writing from the publisher.
All speci cations and contents of this user guide are subject to change without notice.
Intended use of the user guide
This user guide contains instructions necessary to safely and properly handle, install and maintain
the electric device. They should be brought to the attention of anyone who installs or maintains
the electric device or associated equipment.
All of the safety warnings and instructions in this user guide must be followed to prevent injury to
personnel or damage to property. Only quali ed and authorized personnel, familiar with health
and safety requirements and national legislation, shall be permitted to handle, install and maintain
the device.
This user guide must be kept for future reference during installation, operation and maintenance.
This user guide uses illustrations as examples only. Illustrations in this user guide may not
necessarily re ect all system features.
Product naming convention
In this user guide, the EC-C1200-450 electric converter is referred to as the electric device.
The following naming convention is used to refer to electric device type code and options:
EC-C1200-450-L+MC/+AFE/+UG/+DC
The rating plate of the electric device has the correct name of that particular electric device.
Part of the name Explanation
EC Electric Converter
C1200 Product name part 1
450 Product name part 2
L/S System size
+MC* Motor Control software -option
+AFE* Active Front End software -option
+UG* Microgrid (µgrid) software -option
+DC** DCDC-converter software -option
*Followed with number that represents the nominal current (A
RMS)
: 120, 180, 240, 300, 350. These
options are available on the same electric device or alone.
**Followed with number that represents the nominal current (A
AVG)
: 150, 250, 300, 400. This
option is not available with other options.
EC-C1200-450
1. General information
4 |
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019
| BC265735231757en-000109