Danfoss DHP-H, Руководство пользователя

Страница: 1 / 46

user’s manual
DHP-H, DHP-l, DHP-C, DHP-a
Navigate the control computer’s menus using:
To increase or reduce the set values use:
To adjust the room temperature: start by pressing
The degree information that now appears in the display is the
last desired room temperature.
To increase the temperature: press
To lower the temperature: press
The temperature you now require is registered immediately.
(After approximately ten seconds the desired room tempera-
ture appears in the display again, together with other infor-
mation.) The heat pump now starts to work to reach the new
temperature.
VUBMA102