Danfoss D9h, Руководство по эксплуатации

Страница: 22 / 206

1.
2.
a.
b.
c.
3.
e3
0b
u1
41
.1
2
1
2
3
4
5
6
7
8
9
10
Illustration 6: Visual Representation of a E5h/E6h Enclosure and the Locations of Available Options
1 Passive harmonic filter (PHF)
2 Line reactor
3 Non-fusible disconnect
4 Fusible disconnect
5 Molded-case circuit breaker (MCCB)
6 Mains contactor
7 dU/dt filter
8 Common-mode filter
9 Sine-wave filter
10 Drive module (varies in power rating)
3.4 Drive Identification
3.4.1 Identifying the Drive and Its Options
Enclosure size and specific options are used throughout this guide whenever procedures or components differ based on the drive
and its options. Use the following steps to identify the enclosed drive:
Procedure
Locate the type code (T/C) on the nameplate. The nameplate is found on the exterior of the drive by the bottom grill and
on the control compartment door.
Determine the type of enclosure by obtaining the following information from the type code:
Product group and drive series (characters 1–6).
Voltage rating (character 8).
Model/power rating (characters 10–12).
Go to Table 3 and use the model number and voltage rating to find the enclosure size.
AQ262139143212en-000301 / 130R0879 22 | Danfoss A/S © 2021.10
Product Overview
VLT® AutomationDrive FC 302
Operating Guide