AHF 005/010
■
Commissioning
Prior to initial switch-on of the filter module,
check the wiring for completeness, short
circuit, and ground fault.
If the wiring is not correct, an unintentional
operation of controller and/or filter
module is possible.
Initial power-up
1. Switch on line supply :
- The filter module is ready for operation at once.
2. Check the readiness of the adjustable
frequency drive:
- Proceed in accordance with the instruction
manual of the adjustable frequency drive.
MG.80.B4.22 - VLT is a registered Danfoss trademark
20
