“SLASHBUSTER”
®
Maintenance
D&M Machine Division, Inc.
12 Monte-Brady RD
Montesano, WA 98563
360-249-3366-Phone
360-249-1171-Fax
Страница 1: ... SLASHBUSTER Maintenance D M Machine Division Inc 12 Monte Brady RD Montesano WA 98563 360 249 3366 Phone 360 249 1171 Fax ...
Страница 2: ...Note Keep spindle bearings adjusted to zero endplay check daily Note Keep teeth sharp as per enclosed instructions Note Grease bearing housing daily ...
Страница 3: ...bushings daily II Grease the head bushing every eight hours of operation For a manual grease gun use approximately 20 pumps then tip the head to the inverted position and let the head turn for five minutes thus lubricating the top bearings Teeth Backings Debris Seal I To maintain full warranty use only genuine D M Machine Division Inc replacement teeth II Keep teeth sharp We recommend sharpening e...
Страница 4: ...d play Adjust out all movement using the bearing adjusting nuts 4 Grease all pins daily using hand grease gun only 5 Grease the SLASHBUSTER bearing assembly with Power Punch MPG15 grease Lubricate enough to purge grease from the relief valve Tip the SLASHBUSTER to the inverted position and run for 5 minutes to lubricate the top of bearing 6 It is the responsibility of the owner or operator to perf...
