General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Load safety information
The maximum permitted working load of the Flying adapter
corresponds to a weight of a maximum of two V-Point or Vi-Point
cabinets flown one below the other.
No additional loads must be added.
1 Safety precautions
d&b Z5384/Z5551 Mounting instructions 1.4 en
4
