background image

 

AP setup
In connection with d&b ArrayProcessing (AP), the AP setup

contains the AP data that is generated by the d&b ArrayCalc

simulation software and transferred to the applicable amplifiers via

the d&b Remote network (OCA/AES70) using R1.
As soon as the data has been sent to the amplifiers, the AP setup is

automatically activated.

2.3.1  Controller settings

For acoustic adjustment the INFRA mode can be selected.

INFRA mode
With the INFRA mode selected, the frequency response of the

system extends from 35 Hz to 85 Hz.
The XSLi-SUB/XSLi-GSUB can now be used to supplement

applicable d&b loudspeaker systems operated in full range mode.

2.4  Technical specifications

System data

Frequency response (–5 dB standard)

37 Hz - 110 Hz

Frequency response (–5 dB INFRA)

35 Hz - 85 Hz

Max. sound pressure (1 m, free field) with 40D

137 dB

(SPLmax: Broadband signal IEC 60268)

Loudspeaker data

Nominal impedance front/rear

8/16 ohms

Power handling capacity front (RMS/peak 10 ms)

700/1500 W

Power handling capacity rear (RMS/peak 10 ms)

400/800 W

Components

1 x 18" driver front/1 x 12" driver rear

Connections

1 x NLT4 F/M

Pin assignment

1+: Front+/1–: Front– /2+: Rear+/2–: Rear–

Phoenix option

Phoenix socket (Type: DFK PC 4/4 GF)

Phoenix plug (Type: SPC 5/4)

Optional front splay (XSLi-SUB)

0° or 2.5°

Weight XSLi-SUB

66 kg (146 lb)

Weight XSLi-GSUB

62 kg (136 lb)

XSLi-SUB frequency response, standard and INFRA mode

 

d&b XSLi-SUB/XSLi-GSUB Manual 1.2 en

8

Содержание XSLi-SUB












Отзывы: