Manufacturer's declarations
11.1 Conformity of rigging components
This declaration applies to:
d&b XSL loudspeaker cabinets
(with integrated rigging components.)
▪ Z0770 XSL8
▪ Z0772 XSL12
▪ Z0774 XSL-SUB
▪ Z0775 XSL-GSUB
d&b XSL rigging components
(including all additional components)
▪ Z5771 XSL Flying frame
▪ Z5772 XSL Load beam
▪ Z5775 XSL Safety chain set 2 t.
▪ Z5776 XSL Hoist connector chain 2 t.
by d&b audiotechnik GmbH & Co. KG.
All product variants are included, provided they correspond to the
original technical version and have not been subject to any later
design or electromechanical modifications.
We herewith declare that said products are in conformity with the
provisions of the respective directives including all applicable
amendments.
Detailed and applicable declarations are available on request and
can be ordered from d&b or downloaded from the d&b website at
11.2 Disposal
WEEE-Reg.-Nr. DE: 13421928
When out of use the rigging components must be disposed of in
accordance with the national environmental regulations.
Ensure that damaged rigging components are disposed of in a
way that they cannot be used again.
11 Manufacturer's declarations
d&b XSL Rigging manual 1.1 en
- preliminary -
46
