background image

S21 

飞行参数

Specification

翼展:1600mm(63inch)
机长:1000mm(40inch)
起飞重量: 1.7-1.9kg

推荐配置

Suggested Equipment

推荐马达: 2814-2820 KV800-1000

推荐桨叶: 10-12寸

推荐电调: 40A

推荐舵机: 9gx8pcs

推荐电池 4S 2200-2800mAh

推荐6通道以上接收机

舵机延长线15cm  6根

Y线  3根

舵机反向器  2个

选配配件

Optional Parts

Servo extension wires  6pcs

Y-wire   3pcs

Servo Reverser  2pcs

Wingspan: 1600mm(63inch)
Fuselage Length: 1000mm(40inch)
Flying Weight: 1.7-1.9kg

Suggested Motor: 2814-2820 KV800-1000

Suggested Propeller: 10-12inch

Suggested ESC: 40A

Suggested Servo: 9gx8pcs

Suggested Battery: 4S 2200-2800mAh

Radio:more than 6CH

The Fi-156 was created as a reconnaissance, liaison and air-ambulance aircraft in 1936 by Dr. Gerhard Fieseler. This unique 
airplane’s legs, struts and windows stuck out everywhere, and its landing gear hung down, looking very much like a long-legged, 
big-winged bird, so it was given the nickname “Storch” (the German word for stork).
Virtually nothing about a Storch is streamlined. It was a purpose-built, short takeoff and landing (STOL) aircraft which, with a bit of 
headwind, could become airborne in less than 200 feet, and when its low landing speed was combined with a strong headwind, 
the Storch appeared to land vertically, and sometimes looked like it was flying backwards.

Fi-156于1936年由Gerhard Fieseler博士设计为侦察,联络和空中救护飞机。这架飞机有着独特的起落架,从支柱和窗户向外伸出,它的起落
架垂下,看起来非常像一只长腿的大鸟,所以它被赋予了绰号“Storch”(德语中的鹳)。
几乎没有任何关于Storch的简化。这是一架专门建造的短距离起飞和降落(STOL)飞机,在逆风时,可以在不到200英尺的高空飞行,当它以
低速着陆与强逆风相结合时,Storch几乎可以垂直降落,有时看起来像向后飞。

历史背景

● 

这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止

没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。

● 

This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends 

on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be 

accompanied by an adult at all times if operating this product. Not suitable for children under the age of 14. THIS IS NOT A 

TOY.

● 

不要在机场,军事基地,居民区或其他任何受限制的地方飞行。

● 

Do not fly around some restricted location like airports, military bases, residential areas, etc.

● 

您需要对发射机进行距离检查,以确保没有收到任何干扰。

● 

You will need to range check the transmitter to be sure you are not experiencing any interference.

● 

始终保持先打开发射机后打开接收机,先关闭接收机后关闭发射机的步骤。

● 

Always turn on the receiver last after turning on the transmitter and shut off the receiver first before turning off the transmitter.

● 

如果您是初学者,建议您在有经验玩家的协助下调试和飞行。

● 

If you are only a beginner to the radio control model flying, do not attempt to fly your model without any assistance or advice from 

advanced expert fliers.

● 

请将相关物品放置在孩子们够不到的地方

● 

Keep relevant items out of reach of children.

● 

这个设备的设计已经超过我们正常使用所需要刚性要求,但若您需要以超出我们推荐的动力飞行时,请合理控制动作幅度并适当增加机体强度。

● 

This product has been flight tested to meet or exceed our rigid performance and reliability standards in normal use,if you plan to perform 

any high-stress flying, you are solely responsible for taking any and all necessary steps to control movement range and reinforce the body 

strength.

● 

您的设备中可能包括一些玻纤和碳纤雕刻的部件,这些纤维部件所带的粉尘可能会引起眼睛,皮肤的不适,请您在需要的时候带上护目镜或者防尘服。

● 

This product may include some fiberglass and carbon-fiber reinforced plastic parts,which may cause eye and skin discomfort,pls wear the 

goggles or dust-proof clothes when needed.

● 

因航空运输安全管制,您收到的产品可能没有清单中出现过的胶水,请您理解无法发送胶水给您的原因。您可以在当地文具店很方便的购买到您所需要

的胶水。

● 

Due to air traffic safety control, the products you receive may not have the glue that appears in the list. Please understand and purchase the 

glue you need at your local stationery store.

Balsawood Airplane

注意事项

SAFETY PRECAUTIONS

http://www.dwhobby.com/

Historical Background

Содержание 1.6M Fieseler Fi 156 Storch









Отзывы: