0
TEMPERATURE SELECTION
The temperature of the appliance can be adjusted
by turning the thermostat dial.
The thicker, darker part of the blue line is the coldest
setting.
The thinner, lighter part of the blue line is the
warmest setting.
The “O” position will turn off the cooling function.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.
4
LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise until
the top of the foot is touching the bottom of the
chassis.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
To change the direction of the door swing, follow
the instructions below.
Note:
The upper hinge pin must be unscrewed from
the worktop and screwed into the hole on the other
side of the worktop before replacing the door on the
cabinet.
INTERIOR LIGHT
If the light bulb burns out, it can be replaced by
following the steps below. Ensure the appliance is
unplugged before replacing the light bulb.
1. Remove the screw from the center of the light
cover and pull the cover downward.
2. Remove the old light bulb and discard. Replace
with a 15 watt light bulb.
3. Replace light cover.
