Mounting the Drive
05/2008
Danaher Motion
28
S200-VTS Product Manual
5 MOUNTING
THE
DRIVE
The S200 drives are designed for operation in a cabinet using the following installation
instructions:
Mount the drives vertically inside a cabinet on a flat, solid, electrically conductive mounting
surface that is connected to PE (Protective Earth Ground) and capable of supporting the weight
of the unit.
Provide a good connection to PE. Remove the paint on the mounting surface over an area
extending at least 12 mm (0.5 in) from the mounting bolts to achieve good electrical connection
over a large area between the drive and grounded mounting surface.
Ensure that the environment within the cabinet meets the requirements listed in the
Specifications.
5.1 Mounting
Dimensions
AC INPUT DRIVES
DC INPUT DRIVES
AC1
AC2
AC3 AC4 AC5
DC Base
Drive
w/
Option
S20260
S20360
S20660 S21260 S22448
S20330-
VTS
S20630-
VTS
S20330-
x
S20630-
x
Drive Dimensions
Drive Height (A)
175.0 mm
6.90 in
177 mm
6.97 in
213 mm
8.39 in
152.4 mm
6.00 in
Drive Width (B)
54.8 mm
2.16 in
64.0 mm
2.52 in
76 mm
3.00 in
96.4 mm
3.80 in
28.7 mm
1.13 in
48.3 mm
1.90 in
Drive Depth
1
(C)
131.6 mm
5.18 in
152 mm
5.98 in
192 mm
7.57 in
100.8 mm
3.97 in
Clearance Requirements
Top and Bottom
(D)
12.7 mm
0.50 in
12.7 mm
0.50 in
12.7 mm
0.50 in
19 mm
0.75 in
12.7 mm
0.50 in
12.7 mm
0.50 in
Side to Side (E)
12.7 mm
0.50 in
12.7 mm
0.50 in
12.7 mm
0.50 in
19 mm
0.75 in
12.7 mm
0.50 in
12.7 mm
0.50 in
Mounting Dimensions
Horizontal
Mounting Offset
(F)
25.6 mm
1.01 in
25.6 mm
1.01 in
31.7 mm
1.25 in
57.5 mm
& 6.5
mm
24.6 mm
0.97 in
24.6 mm
0.97 in
Vertical Mounting
Offset (G)
4.3 mm
0.17 in
4.3 mm
0.17 in
2.1 mm
0.08 in
5.0 mm
0.20 in
4.1 mm
0.16 in
4.1 mm
0.16 in
Vertical Mounting
Height (H)
166.4
mm
6.55 in
166.4
mm 6.55
in
169.5
mm 6.67
in
202.5
mm 7.97
in
144.3
mm
5.68 in
144.3
mm
5.68 in
Drive to Drive
Mounting (J)
67.5 mm
2.66 in
76.7 mm
3.02 in
88.7 mm
3.39 in
115.4
mm 4.54
in
41.40
mm
1.63 in
60.96
mm
2.40 in
Mounting
Hardware
M4 or #8
M4 or #8
M4 or #8
M4 or #8
M4 or #8
M4 or #8
Drive Weight
(no option card)
0.77 kg
1.69 lb
0.85 kg
1.86 lb
1.33 kg
2.93 lb
2.56 kg
5.64 lb
0.40 kg
0.88 lb
0.5 kg
1.10 lb
1
Depth measurement is for drive only. Add approximately 50.8 mm (2 in) to depth
given in the table to accommodate mating connectors and wire bend radius.