Appendix A
04/06
Danaher Motion
42 Rev
D
M-SD-7AC-01
The CE test setup consisted of the following:
•
Branch Circuit Protection – 240V, 20A UL listed breaker
•
Line Filter - Corcom 6EQ1
•
Drive – Danaher Motion's Pacific Scientific P70360
•
Motor Power Cable (To J6) – Brad Harrison Cable Assembly
105000A03F5002, (foil shielded, #16 AWG, 5 conductor, 15m)
•
Ferrite on Motor Power Cable – Steward 28A2029-0A0
•
Motor – Pacific Scientific Powerpac N32HCLS-LEK-PF-02
•
I/O Cable (To J4) – Belden 82509 (9 pair, #24 AWG, foil shielded,
1 m)
•
Ferrite on I/O Cable – Fair-rite 0444167281
•
Speed Controller (To J4 via I/O cable) – Danaher Motion
Speedbox
•
Serial Cable (To J5) – Not Populated, parallel connections wired
through J4 connector
Declaration of Conformity
In our Declaration of Conformity, we affirm our compliance with Directive
73/23/EEC (Low voltage Directive) and with Directive 89/336/EEC (EMC
Directive).
For the P70360-PNN and P70360-SDN EMC testing was done according to
EN61800-3:1997 with the incorporation of amendment A11:2000 (Emission
limits according to chapter 6.3.1 of that regulation, First environment /
restricted distribution).
During assembly of our product in a machine, startup (that is, normal
operation) is prohibited until the end-product complies with Directive
89/392/EEC (Machine Directive) and directive 89/336/EEC (EMC Directive).
The machine manufacturer must prove that the complete system conforms
with all relevant European Directives.
Drive conformance to specified standards is certified by the Declaration of
Conformity on the following page.