Danaher Motion DBL Series Скачать руководство пользователя страница 9

Страница: 9 / 72

I.5

Standard features

I.5.1

Style

The basic style for the DBL/DBK synchronous motors is style IM B5 according to

DIN42950. The permitted mounting positions may be read from the technical data of the

motor series.

I.5.2

Shaft end, A-side

Power transmission is made through the cylindrical shaft end A (fit k6) to DIN 748, with a

locking thread (except DBL1/DBL2) but

without a fitted-keyway

If the motors drive via pinions or toothed belts, then high radial forces will occur. The per-

missible values at the end of the shaft may be read from the diagrams in chapter III. The

maximum values at rated speed you will find at the technical data. Power take-off from

the middle of the free end of the shaft allows a 10% increase in F

The curves are based on a bearing life of 20.000 operating hours.

The axial force F

must not exceed F

/3.

Double-coned collets have proved to be ideal zero-backlash coupling devices, combined,

if required, with metal bellows couplings.

I.5.3

Flange

Flange dimensions to IEC standard, fit j6, accuracy according to DIN 42955.

Tolerance class:

I.5.4

Protection class

Standard version

IP65

Standard shaft bushing

IP64

Shaft bushing with shaft-sealing ring

IP65

I.5.5

Protective device

The standard version of each motor is fitted with a thermostat (electrically isolated,

normally closed). You will find the switching point at the technical data. The thermostat

does

not

provide any protection against short, heavy overloading. Provided that our pre-

assembled resolver cable is used, the thermostat contact is integrated into the monitoring

system of the digital servo-amplifier SERVOSTAR™ 600.

The flange temperature must not exceed 65°C in rated operation.

Motor series DBL/DBK

Danaher Motion

05/2001 - E.4.929.4/09

General

Содержание DBL Series









































































Результаты поиска

Содержание DBL Series

Отзывы:

Похожие инструкции для DBL Series

Бренды по названию

Популярные бренды

Danaher Motion DBL Series, Руководство пользователя

Результаты поиска

Содержание DBL Series

Отзывы:

Похожие инструкции для DBL Series

Бренды по названию

Популярные бренды