Danaher Motion DBL Series Скачать руководство пользователя страница 19

Страница: 19 / 72

II.3

Commissioning

The procedure for commissioning is described as an example. A different method may be

appropriate or necessary, depending on the application of the equipment.
Only specialist personnel with extensive knowledge in the areas of electrical engineering /

drive technology are allowed to commission the drive unit of servo-amplifier and motor.

Caution!

Check that all live connection points (terminal boxes) are safe against accidental

contact. Deadly voltages can occur, up to 900V.

Never undo the electrical connections to the motor when it is live. The residual

charge in the capacitors of the servo-amplifier can produce dangerous voltages up

to 5 minutes after the mains supply has been switched off.

The surface temperature of the motor can reach 100°C in operation.

Check (measure) the temperature of the motor. Wait until the motor has cooled

down below 40°C before touching it.

Make sure that, even if the drive starts to move unintentionally, no danger can re-

sult for personnel or machinery.

Check the assembly and orientation of the motor.

Check the drive components (clutch, gear unit, belt pulley) for the correct seating

and setting (observe the permissible radial and axial forces).

Check the wiring and connections to the motor and the servo-amplifier. Check that

the earthing is correct.

Test the function of the holding brake, if used. (apply 24V, the brake must be re-

leased).

Check whether the rotor of the motor revolves freely (release the brake, if neces-

sary). Listen out for grinding noises.

Check that all the required measures against accidental contact with live and mov-

ing parts have been carried out.

Carry out any further tests which are specifically required for your system.

Now commission the drive according to the commissioning instructions for the

servo amplifier.

In multi-axis systems, individually commission each drive unit (servo-amplifier and

motor).

Motor series DBL/DBK

Danaher Motion

05/2001

Installation / Commissioning

Содержание DBL Series









































































Результаты поиска

Содержание DBL Series

Отзывы:

Похожие инструкции для DBL Series

Бренды по названию

Популярные бренды

Danaher Motion DBL Series, Руководство пользователя

Результаты поиска

Содержание DBL Series

Отзывы:

Похожие инструкции для DBL Series

Бренды по названию

Популярные бренды