Danaher Motion ACOMEL K 4000, Руководство пользователя, Страница: 40 / 48

Menu H : Display of the last 8 failures
Allow to display the last 8 failures recorded in a FIFO table.
Menu I : RESET
2ndF I will RESET the drive and allow to start again if the cause of the failure has
been removed.
Menu J : Save the last speed reference as default
In the K
EY
P
AD
operation this instruction allows a fast save of the last inputted speed
reference value, without to go through the all Menu B .
Setting a value using the “Arrow UP” and “Arrow DOWN”
Two parameters can be set using the “Arrow UP” and “Arrow DOWN” of the K
EY
P
AD
•
The speed reference 2ndF F
•
The
I
DTO
value of the
MCM
when accessed from
menu D
Once you arrived to the corresponding menu step, the function is automatically
activated. To leave the step and confirm the value, just key in
Enter .
During the setting of the
I
DTO
of MCM, a $ sign will be displayed at the position 18 of
the second line of the display.
Page 40 / 48 User Manual K4000 S476-gb-0348