Danaher Motion ACOMEL K 4000, Руководство пользователя, Страница: 4 / 48

Connecting the PTC - motor temperature protection 24
The analog input AI1 24
Inhibit the analog speed reference input 24
Selecting one of the pre-set speeds 24
Connecting the dynamic braking resistor 25
Programming the K4000 26
The Menus 26
The User Interface PC560 26
QUICK START 27
3. Compulsory connections 27
4. The characteristic Voltage / Frequency or Power / Frequency 27
5. The input of the parameters 27
6. The START 28
The programmable parameters 29
Menu A : Inverter Related Parameters 29
Menu B – Part 1: Operation related parameters 29
Menu B - Part 2: Motor related parameters 31
Menu C : Allocation of the relay outputs 36
Menu C : Allocation of the analog output 37
Menu D: The parameters accessible in START mode 37
Menu E : reversing from K
EY
P
AD
38
Menu F : Setting a new speed using the K
EY
P
AD
38
Menu G : Selection of the display bloc 38
Display of the digital I/O status 39
Menu H : Display of the last 8 failures 40
Menu I : RESET 40
Menu J : Save the last speed reference as default 40
Setting a value using the “Arrow UP” and “Arrow DOWN” 40
The Tachobox Option 41
Galvanic insulation of the power circuitry 41
Galvanic insulation of the power circuitry 42
K4000 – List of Error messages 43
Part numbers for spares, options and accessories 44
Assistance and Trouble shooting 45
Overview of Menu A, B and C 46
DECLARATION OF CONFORMITY 47
Valid from Software Version V15 dated January 2002 or later
Page 4 / 48 User Manual K4000 S476-gb-0348