Danaher Motion ACOMEL K 4000, Руководство пользователя, Страница: 19 / 48

Term
No
Short
Name
Description
How to activate
K3000
X2 Ref.
41 SAN1 Analog output 1 Internal programmable 17
42 AGND Analog ground parameter 0 ... 10 VDC 18
43 SAN2 Analog output 2 Internal programmable na
44 AGND Analog ground parameter 0 ... 10 VDC na
45 CSM+ Catch a spinning motor To activate apply +25 VDC na
46 CSM- Catch a spinning motor Must be connected to AGND na
47 KEY Program access key Access possible when na
48 AGND Analog ground connected to AGND na
49 RST Reset Apply +25VDC to RESET 29
50 +25VDC 25 VDC auxiliary power supply Available for input activation 50
51 +25VDC 25 VDC auxiliary power supply Available for input activation na
52 RE3-NO Output relay 3 - contact NO Contact will close 37
53 RE3-COM Output relay 3 - common When relay is energized 38
54 RE3-NC Output relay 3 - contact NC Contact will open 39
55 RE4-NO Output relay 4 - contact NO Contact will close 41
56 RE4-COM Output relay 4 - common When relay is energized 42
57 RE4-NC Output relay 4 - contact NC Contact will open 43
58 PTC+ Terminal for motor PTC + Activated when motor 23
59 AGND Analog ground temperature too high 24
60 NOT USED 40
61 AI1 Analog input 1 Analog input 0 … 10 V
Comparator level and time
delay to be programmed in
menu C na
62 AGND Analog ground
63 INHA Inhibition of the analogue speed
reference input Apply + 25VDC 27
64 AGND Analog ground
65 NOT USED
66 NOT USED
67 2
5
Partition selection - value 32 Apply + 25VDC na
68 NOT USED
69 NOT USED
70 AGND Analog ground parameter 0 ... 10 VDC na
71 AGND Analog ground Connect NTC return na
72 NTC+ Terminal for motor NTC Connect NTC+ na
73 2
0
Pre-set speed - value 1 Apply + 25VDC na
74 2
1
Pre-set speed - value 2 Apply + 25VDC na
75
76
77
78
79
80
S476-gb-0348 User Manual K4000 Page 19 / 48