Danaher Motion ACOMEL K 4000, Руководство пользователя, Страница: 10 / 48

The 19” – rack versions, KL4000
Current and Power ratings
Model Output Current A
RMS
Typical motor power
Nominal Continuous Peak kW @ 3 x 400 V
KL4005 5 6 10 2.5
KL4010 10 12 15 5
KL4015
15 18 23 7.5
KL4020
20 24 30 10
KL4030 30 36 45 15
Input current: All units are rated for a maximal input current of 32 A
RMS
Input terminals: 10 mm
2
Input cables: Minimum section 6 mm
2
resp. 10 AWG
Use copper conductors 75°C only
Type Part Numbering
Connection from front
KL40xx-00F Without PC560 and external dynamic braking resistor
KL40xx-01F Without
PC560,
with
external dynamic braking resistor
KL40xx-10F With PC560 and without external dynamic braking resistor
KL40xx-11F With PC560 and with external dynamic braking resistor
Connection from rear
KL40xx-00R Without PC560 and external dynamic braking resistor
KL40xx-01R Without PC560, with external dynamic braking resistor
KL40xx-10R With PC560 and without external dynamic braking resistor
KL40xx-11R With
PC560 and
with
external dynamic braking resistor
The dimensions of the KL4000
Mounting Instructions
1. The area on top of the 3 fans, whole
width and 112 mm depth, must
remain free for correct cooling of the
heat sink. At least 50 mm must be
available on bottom and top of this
area.
2. On the left side they are ventilation
opening to allow a correct cooling of
the chopper inductance. Those
opening must not be covered.
Unit height: 6U = 265.9 mm
Weight: 29 kg
All units have the same dimensions
Page 10 / 48 User Manual K4000 S476-gb-0348