8.11.5
Incremental encoder / sine encoder with Hall (X1)
Encoder types (incremental or sine/cosine) that do not provide definitive information on commuta-
tion, can be used as a complete feedback system using an additional Hall dongle.
In this case, an adapter is used for interfacing and adapting the signals (Hall dongle,
ð
p. 90). This
adapter is also used to connect encoders known as ComCoders.
Encoder types with a power consumption of more than 150mA can also be connected using our
external power supply (
ð
p. 113). For encoders that do not have integrated terminating resistors,
we offer an optional terminating adapter (
ð
p. 113)
If you plan to use a cable longer than 25m, please contact our application department.
Frequency limit (A, B): 250 kHz
RS422 with Hall: FBTYPE 12
Encoder with Hall: FBTYPE 11
56
SERVOSTAR
®
601...620 Product Manual
Electrical Installation
07/2007
Danaher Motion
SERVOSTAR 600
