DANA SPICER TM4 SUMO HP HV Powertrain, Руководство по устранению неисправностей

Страница: 170 / 192

170
Appendix
Appendix
Appendix 1: Table of SysFile ID
The following table of the SysFile ID gives the in formation of the diagnostic type, the code description and the
related Troubleshooting Tree.
SysFile
ID Diagnostic
Type
Description
Troubleshooting
Tree
0x0000 Info
SysFile 0x00 - SysFile cleared (The system file was
cleared)
1
0x000A
Warning
SysFile 0x0A (Warning related to the SysFile)
2
0x0312 Error
Board 0x12 - Incompatibility between software and
hardware (Error related to the Board)
12
0x0313
Warning
Board 0x13 - VAUX too low (Warning Vaux to low.)
3
0x0314
Warning
Board 0x14 - VAUX too high (Warning Vaux too high)
4
0x0315
Warning
Board 0x15 motor temp sensor shorted to -Vaux
(Warning motor temperature sensor has been
shorted to -Vaux.)
5
0x0316 Warning
Board 0x16 motor temp sensor open or shorted to
+Vaux (Warning motor temperature sensor has been
disconnected or shorted to +Vaux.)
5
0x0317 Error Board 0x17 (Error related to the Board.)
26
0x0318
Error
Board 0x18 (Error related to the Board.)
26
0x0319
Error
Board 0x19 - Abnormal battery current condition as
not operational (Abnormal battery current condition
as not operational)
6
0x0321 Warning
Board 0x21 motor temperature sensor A1 was
shorted to -Vaux.
5
0x0322 Warning
Board 0x22 motor temperature sensor A1 was
disconnected or shorted to +Vaux.
5
0x0323 Warning
Board 0x23 motor temperature sensor B1 was
shorted to -Vaux.
5
0x0324 Warning
Board 0x24 motor temperature sensor B1 was
disconnected or shorted to +Vaux.
5
0x0325
Warning
Board 0x25 motor temperature sensor C1 was
shorted to -Vaux.
5
0x0326 Warning
Board 0x26 motor temperature sensor C1 was
disconnected or shorted to +Vaux.
5
0x032B
Warning
Board 0x2B - HVIL voltage input fault while in
operational state (Warning HVIL voltage input fault
while in operational state)
8
0x032C Error
Board 0x2C - HVIL voltage input fault while in
standby state (Error HVIL voltage input fault while in
standby state)
8
0x032D Warning
Board 0x2D - HVIL voltage output fault while in
operational state (Warning HVIL voltage output fault
while in operational state)
9