DAN DRYER 346-347-348 Скачать руководство пользователя страница 6

6

RECOMMENDED INSTALLATION HEIGHT 

From bottom edge of hand dryer above finished floor.

CLEANING AND MAINTENANCE 

Routine cleaning and maintenance is recommended every 12 months to ensure your hand 

dryer is running at optimal performance.

 

• Disconnect the electrical supply. 
• Remove the two cover-mounting screws. 
• Remove the casing. 
• Clean the interior of the dryer and remove any dust. 
• Check carbon brushes. If carbon brushes are worn, they must be replaced.  
  The estimated lifespan for carbon brushes is 580K activations. 
• Do not soak. 
• Use a damp cloth and mild cleaning solution. Never use cleaning  
  detergents with an abrasive effect. 
• Replace the cover. Do not overtighten the screws.

USER GUIDE 

•  No-touch operation. 
•  Shake excess water from hands. 
•  Place hands under the outlet to start operation. 
•  Rub hands lightly and rapidly. 
•  Stops automatically after hands are removed.

Men

1270 mm (50”)

Women

1194 mm (47”)

Children, 4-7 years

889 mm

(35”)

Children, 8-10 years

991 mm

(39”)

Children, 11-13 years

1092 mm (43”)

Children, 14-16 years

1194 mm (47”)

Wheelchair users

1016 mm (40”)

Содержание 346-347-348











Отзывы: