Z-Trak2 3D Profiler Sensors
Using Z-Expert
•
47
Using a configuration file
To save Z-Trak2 settings in a file
1.
In the
Sources Explorer
, select the device for which to save the current configuration.
2.
On the device shortcut menu, choose
Save CCF
.
3.
Choose a location and filename, then click
Save
.
The configuration is saved in a file with a .ccf extension.
To load Z-Trak2 settings from a file
To load a saved configuration, choose
Load CCF
from the device shortcut menu and select a .ccf
file.
Using a power-up configuration
In the Profiler Management category, next to
Power-up Configuration
, click
Press
.
Figure 18. Power-up dialog for choosing, loading, or saving power-up settings.
