Dalsa X64-AN Quad, Руководство пользователя

Страница: 88 / 129

X64-AN Quad User's Manual Sapera LT

81

Configuration of line/frame trigger parameters such as source (internal via the frame grabber
/external via some outside event), electrical format (TTL, LVDS, OPTO-isolated), and signal
active edge or level characterization.
CamExpert Example: Interfacing the JAI CV-A11
The CamExpert utility is presented by using the example of interfacing the JAI CV-A11 progressive
scan camera to the X64-AN Quad. The major steps covered are:

Camera interfacing check list

CamExpert interfacing outline

JAI CV-A11 in free run exposure mode

JAI CV-A11 in Partial Scan mode

JAI CV-A11 in Edge Pre-select (trigger) mode

JAI CV-A11 in Time Integration mode
Download the user's manual directly from the JAI webInterfacing Outline

Sapera and the X64-AN Quad device driver are installed.

Check for an existing CCA file, distributed with Sapera, that will provide camera timing
parameters. For the JAI CV-A11 the supplied file is "J_CV-A11.cca ".

Check the Teledyne DALSA web site for a published application note with camera files

Connect the interface cables for video and serial port control to the camera. The X64-AN Quad
provides power to the camera via the video cable.

Run the JAI CV-A11 camera control tool to set the camera in free run mode. This will simplify
testing the camera file timing parameters. The following screen image shows the control tool version
used within this document.
Figure 41: JAI CV-A11 Control Tool Info