Dalsa Shad-o-Box 2K HS, Руководство пользователя

Страница: 9 / 20

Shad-o-Box 1K/2K HS User Manual p. 9
6. Connectors, Cables and Status Indicators
The Shad-o-Box HS detectors use the following connectors:

An RJ-45 connector for Gigabit Ethernet signals, data signals
o CAT5E or CAT6 Ethernet cable

One 2-pin Lemo connector for power
o Lemo EGG.0B.0302
o Mating connectors:
elbow type: FHG.0B.302.CLAD52Z
straight type: FGG.0B.302.CLAD52
Detector Status LED
The detector is equipped with a color LED used to display the status of the detector’s operation. The table below
summarizes the operating states of the detector and the corresponding LED states.
Color of Status LED Meaning
1 Off No power
2 Green Detector is operational
pin Description
1 Supply voltage (+12V/ 2A)
2 Ground
The power input is protected by a
resettable fuse. If the fuse is
activated, power cycle (off/on)
the detector to reset.