Dalsa Shad-o-Box 2K HS, Руководство пользователя

Страница: 10 / 20

Shad-o-Box 1K/2K HS User Manual p. 10
7. Setting up the Detector
GigE Network Adapter
If the computer to be used with the detector does not have a Gigabit network adapter or second built in Gigabit NIC,
a PCI bus Gigabit NIC needs to be installed. Typically under Windows XP the PCI Gigabit NIC is recognized
automatically when Windows boots. An example of a high performance NIC is the Intel PRO/1000 MT adapter.
Review the NIC documentation concerning any special driver required for Windows. Install the PCI bus Gigabit
NIC as described by the NIC manufacture's documentation.
Connect Ethernet cable
Connect the Ethernet cable from the detector to the computer Ethernet jack. Secure the RJ-45 connector to the
detector.
Connect power cable
Connect a power cable from the detector to a +12V power supply.
Status Light
Verify that the status light is solid green.
Software Installation
Refer to the next chapter for instructions on installing and running the detector software.