Rad-icon 1520 GigE User Manual
21
Teledyne DALSA
Acquiring Images
The CamExpert software can be started to acquire images.
Select the correct device from the Device Selection Menu.
The software will display all available device parameters of the detector.
The user has the option to either snap an image or to grab continuously. Snapping an
image produces a single frame, whereas the grabbing process generates multiple frames
by operating in a continuous mode.
To snap an image:
Click the Snap button. The Detector has now snapped a single frame. The image appears
in the GUI window.
To grab continuously:
Click the Grab button. The detector is now armed and ready to acquire images in
continuous mode.
To stop a Grab process the user must press the Freeze button. After the Freeze button is
pressed the detector ignores any additional triggers and no additional images are
acquired.
