48
Piranha4 8k Color Camera User's Manual
03-032-20274-00
Teledyne DALSA
Camera Control Category
The P4 camera controls, as shown by CamExpert, groups sensor specific parameters. This
group includes controls for line rate, exposure time, scan direction, and gain. Parameters in
gray are read only, either always or due to another parameter being disabled. Parameters in
black are user set in CamExpert or programmable via an imaging application.
Camera control feature descriptions
The following table describes these parameters along with their view attribute and minimum
camera firmware version required. Additionally the firmware column will indicate which
parameter is a member of the DALSA Features Naming Convention (DFNC), versus the
GenICam Standard Features Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a
firmware revision number.
