Dalsa Piranha XL PX-HM-16K12B-00-R Скачать руководство пользователя страница 6

Страница: 6 / 75

•

The Piranha XL XDR Camera

Description

Teledyne DALSA introduces a breakthrough multiline CMOS TDI camera with unprecedented speed

and responsivity, and exceptional low noise. The Piranha XL™ camera has 16k pixel resolution and

a 5 µm x 5 µm pixel size and is compatible with fast, high magnification lenses. The camera has a

125 kHz line rate, very low noise and high sensitivity through TDI on-chip summing of multiple

image lines. Exposure control can be used for seamless variable speed imaging down to stopped

conditions.

The Piranha XL camera uses the Camera Link HS™ interface, which is the industry standard for

very high speed camera interfaces with long transmission distances and cable flexing requirements.

Teledyne DALSA’s Piranha XL camera and XTIUM Camera Link HS frame grabber combine to offer a

complete solution for the next generation of Automatic Optical Inspection systems.

The Piranha XL camera is recommended for detecting small defects at high speeds and over a large

field of view in LCD and OLED flat panel displays, printed circuit boards, film and large format web

materials.

Three Piranha XL Models are Available

eXtended Dynamic Range Models (XDR)

The PX-HM-16K12X-00-R camera offers extended dynamic range and high scanning speed for applications detecting

defects in very dark and very bright areas.
The PX-HM-16K06X-00-R camera offers extended dynamic range for applications targeted at highly variable scanning

speed including those that involve stop and start conditions.

High Gain Camera Model

The PX-HM-16K12B-00-R camera offers the highest gain and scanning speed for light starved applications detecting low

contrast defects.
The performance and features of the High Gain camera are detailed in the user document

Piranha XL High Gain: 03-032-

20216

Содержание Piranha XL PX-HM-16K12B-00-R












































































Результаты поиска

Содержание Piranha XL PX-HM-16K12B-00-R

Отзывы:

Похожие инструкции для Piranha XL PX-HM-16K12B-00-R

Бренды по названию

Популярные бренды

Dalsa Piranha XL PX-HM-16K12B-00-R, Руководство пользователя

Результаты поиска

Содержание Piranha XL PX-HM-16K12B-00-R

Отзывы:

Похожие инструкции для Piranha XL PX-HM-16K12B-00-R

Бренды по названию

Популярные бренды