56
•
Appendix A: GenICam Commands
Linea HS Multifield Camera
Built-In Self-Test Codes (BIST)
In the Camera Information screen shot example above, the Power-On Status is showing ”Good”,
indicating that the camera powered up without any problems.
Details of the BIST codes can be found in the Trouble Shooting Guide in Appendix B.
Camera Power-Up Configuration Selection Dialog
CamExpert provides a dialog box which combines the GemICam features used to select the
camera’s power-up state and for the user to save or load a camera state as a specific user set that
is retained in the camera’s non-volatile memory.
Camera Power-up Configuration
The first drop list selects the camera configuration set to load on power-up (see feature
UserSetDefaultSelector). The user chooses the factory data set or from one of 16 available user-
saved states.
User Set Configuration Management
The second drop list allows the user to change the camera configuration any time after a power-up
(see feature UserSetSelector). To reset the camera to the factory configuration, select Factory Set
and click Load. To save a current camera configuration, select User Set 1 to 16 and click Save.
Select a saved user set and click Load to restore a saved configuration.
