Dalsa Linea2 5GigE, Руководство пользователя

Страница: 90 / 164

Linea2 5GigE Series Camera Operational Reference • 83
Display Name Feature & Values Description Standard
& View
Sensor Component sensorComponentSelector Controls the enable state of the sensor lines. Beginner
DFNC
NIR nir Enable sensor NIR line.
Component Enable sensorComponentEnable Enable or disable sensor line. Beginner
DFNC
Horizontal Offset OffsetX Horizontal offset from the Sensor Origin to the Area Of Interest
(in pixels), offset maximum is limited to 4096 minus the width
of AOI measured in pixels.
Beginner
Width Width Width of Image provided by the device (in pixels).
Beginner
Height Height Height of the Image provided by the device (in lines).
Beginner
Horizontal Flip ReverseX Horizontal image flip function.
Expert
Multiple ROI Mode MultipleROIMode Enable the Multiple ROI (Region of Interest) per image feature.
The ROI Count is set by the Multiple ROI Count feature.
Expert
DFNC
Off Off Single ROI per image.
Active Active The ROI per image feature is active.
ROI Count Horizontal multipleROICountHorizontal Specifies the number of ROI (Region of Interest) available for
the X axis.
Expert
DFNC
ROI Count multipleROICount Specifies the number of possible ROI (Region of Interest)
available in an acquired image. Two is minimum, while the
maximum is device specific.
Expert
DFNC
ROI Selector multipleROISelector Select an ROI (Region of Interest) when Multiple ROI Mode is
enabled. Selector range is from 1 to the Multiple ROI Count
value.
Expert
DFNC
ROI (x1, y1) roi1_1 ROI (x1, y1)
ROI (x2, y1) roi2_1 ROI (x2, y1)
ROI (x3, y1) roi3_1 ROI (x3, y1)
ROI (x4, y1) roi4_1 ROI (x4, y1)
ROI Offset X multipleROIOffsetX Horizontal offset (in pixels) from the origin to the selected ROI
(Region of Interest).
Expert
DFNC
ROI Width multipleROIWidth Width of the selected ROI (Region of Interest) provided by the
device (in pixels).
Binning Selector binningSelector Select how the Horizontal and Vertical Binning is done. The
Binning function can occur in the digital domain of a device or
at the actual sensor.
Beginner
DFNC
In Digital Domain InDigitalDomain The Binning function can be done inside the device but with a
digital processing function. Binning doesn’t affect the current
data rate from the sensor or camera.
Binning Mode binningMode Sets the mode used to combine pixels together when
BinningHorizontal and/or BinningVertical is greater than 1.
Beginner
DFNC
Sum Sum The responses from the individual pixels are added together,
resulting in increased sensitivity.
Average Average The responses from the individual pixels are averaged, resulting
in increased signal to noise ratio.
Binning Horizontal BinningHorizontal Number of horizontal pixels to combine together using the
method selected by binningMode. This reduces the horizontal
resolution of the image.
Beginner
Binning Vertical BinningVertical Number of vertical pixels to combine together using the method
selected by binningMode. This reduces the vertical resolution of
the image.
Beginner