Dalsa Genie Nano-5G Series, Руководство пользователя, Страница: 64 / 204

62 • Contents Nano-5G Series GigE Vision Camera
I/O Control Feature Descriptions
Display Name Feature & Values Description Device
Version
& View
Trigger Selector TriggerSelector Selects which type of trigger to configure with the various
Trigger features.
1.00
Beginner
Single Frame Trigger(Start) FrameStart Selects a trigger starting the capture of a single frame.
Frame size is determined by image format feature
“Height”.
MultiFrame Trigger(Start) FrameBurstStart Selects a trigger to capture multiple frames. The number
of frames is specified by the “triggerFrameCount” feature.
AcquisitionStart
Trigger(Start)
AcquisitionStart Enables the selection of a trigger source that starts the
Acquisition of one or many frames.
Trigger Mode TriggerMode Controls the enable state of the selected trigger.
1.00
Beginner
Off Off The selected trigger is turned off.
On On The selected trigger is turned active.
Trigger Frames Count triggerFrameCount Sets the total number of frames to acquire when a valid
trigger is received. This feature is available when Trigger
Selector = MultiFrame Trigger(Start).
1.00
DFNC
Beginner
Software Trigger TriggerSoftware Generate a software command internal trigger
immediately no matter what the TriggerSource feature is
set to.
1.00
Beginner
Trigger Source TriggerSource Specifies the internal signal or physical input line to use as
the trigger source. The selected trigger must have its
TriggerMode set to ON.
See Input Signals Electrical Specifications.
1.00
Beginner
Line 1 Line1 Select Line 1 (and associated I/O control block) to use as
the external trigger source. See LineSelector feature for
complete list.
Line 2 Line2 Select Line 2 (and associated I/O control block) to use as
the external trigger source. See LineSelector feature for
complete list.
Software Software The trigger command source is only generated by
software using the Trigger Software command.
Action 1 Action1 Select the GigEVision Action Command 1 as the internal
trigger source. This is a broadcast command that multiple
devices can respond to simultaneously.
Timestamp Modulo Event timestampModuloEvent Select the timestamp modulo event as the internal trigger
source.
Timer1End Event Timer1End Select the TimerEnd Event as the internal trigger source.
Counter1End Event Counter1End Select the CounterEnd Event as the internal trigger
source.
Trigger Input Line Activation TriggerActivation Select the activation mode for the selected Input Line
trigger source. This is applicable only for external line
inputs.
1.00
Beginner
Rising Edge RisingEdge The trigger is considered valid on the rising edge of the
line source signal (after any processing by the line
inverter module).
Falling Edge FallingEdge The trigger is considered valid on the falling edge of the
line source signal (after any processing by the line
inverter module).
Any Edge AnyEdge The trigger is considered valid on any edge of the line
source signal (after any processing by the line inverter
module).
Trigger Overlap (in µ s)
TriggerOverlap States if a trigger overlap is permitted with the Active
Frame readout signal. This feature defines if a new valid
trigger will be accepted (or latched) for a new frame.
1.00
Guru
Off Off No trigger overlap is permitted.