Xtium2-CL MX4 User's Manual
Declarations of Conformity
•
94
Declarations of Conformity
Copies of the Declarations of Conformity documents (for example, EU, FCC & ICES Supplier and
Material Composition Product Declaration) are available on the product page on the
or by request.
FCC Statement of Conformance
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following
conditions:
1.
The product may not cause harmful interference; and
2.
The product must accept any interference received, including interference that may cause
undesired operation.
FCC Class A Product
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment is intended to be a component of a larger industrial system.
EU and UKCA Declaration of Conformity
Teledyne DALSA declares that this product complies with applicable standards and regulations.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This product is intended to be a component of a larger system and must be installed as per
instructions to ensure compliance.
