Xtium2-CL MX4 User's Manual
Installing Xtium2-CL MX4
•
19
Firmware Update: Manual Mode
Select
Manual
mode to load firmware other then the default version or when, in the case of
multiple Xtium2-CL MX4 boards in the same system, if each requires different firmware.
The following figure shows the Device Manager manual firmware screen. Displayed is information
on all installed Xtium2-CL MX4 boards, their serial numbers, and their firmware components.
Performing a Manual Firmware Update
•
Select the Xtium2-CL MX4 to update via the board selection box (if there are multiple boards in
the system)
•
From the Configuration field drop menu select the firmware version required (typical required to
support different cameras)
•
Click on the Start Update button
Figure 2: Manual Firmware Update
•
Observe the firmware update progress in the message output window
Figure 3: Firmware Update Progress
•
Close the Device manager program when the device reset complete message is shown
