Dalsa CALIBIR 640 GigE, Руководство пользователя

Страница: 14 / 105

14 • Calibir 640 Series Overview Calibir 640 GigE IR Camera User's Manual
GigE Vision Interface
Calibir 640 GigE Vision cameras comply with the GigE Vision and GenICam standard protocols.
GigE Vision Sapera Application Description
Calibir cameras are 100% compliant with the GigE Vision 1.0
specification which defines the communication interface protocol
used by any GigE Vision device. The device description and
capabilities are contained in an XML file. For more information see:
http://www.machinevisiononline.org/public/articles/index.cfm?cat=1
67
Calibir cameras implement a superset of the GenICam™ specification
which defines device capabilities. This description takes the form of
an XML device description file respecting the syntax defined by the
GenApi module of the GenICam™ specification. For more information
see www.genicam.org.
The Teledyne DALSA GigE Vision Module provides a license free development platform for Teledyne
DALSA GigE hardware or Sapera vision applications. Additionally supported are Sapera GigE Vision
applications for third party hardware with the purchase of a GigE Vision Module license, or the
Sapera processing SDK with a valid license.
The GigE Vision Compliant XML device description file is embedded within Calibir firmware allowing
GigE Vision Compliant applications access to Calibir capabilities and controls immediately after
connection.
Figure 1: GigE Application Architecture