Dalsa C1240, Руководство пользователя

Страница: 223 / 327

Nano Series GigE Vision Camera Operational Reference • 213
Action Control Feature Descriptions
The following table describes these parameters along with their view attribute and minimum
camera device version required. Additionally the Device Version column will indicate which
parameter is a member of the DALSA Features Naming Convention (denoted by DFNC), versus the
GenICam Standard Features Naming Convention (SFNC tag is not shown).
The Device Version number represents the camera software functional group, not a firmware
revision number. As Genie Nano capabilities evolve the device version tag will increase, therefore
identifying the supported function package. New features for a major device version release will be
indicated by green text for easy identification.
Display Name Feature & Values Description
Device Version
& View
Action Selector ActionSelector Selects the action command to configure. Certain
Nano features support 2 Action commands.
1.03
Beginner
Action Group Key ActionGroupKey Nano default=0 for all action command.
Provides the key that the device uses to validate that
the action command message is part of the requested
group.
1.03
Guru
Action Group Mask ActionGroupMask Nano default=1 for action 1, or 2 for action 2.
Provides the mask used to filter particular action
command messages for the selected action.
1.03
Guru
Action Device Key ActionDeviceKey This Write Only feature provides a method to uniquely
target Action Commands to specific Nano cameras.
Using an application supplied by Teledyne DALSA, the
user writes an ID value which cannot be read, but
allows specific Nano cameras to act on commands.
Contact Sales for additional information.
1.03
Invisible
GigE Vision Action Command Reference
An Action Command is a single Broadcast packet sent from the Host Software application to all
cameras connected on the same network. How cameras act on an Action Command depends on its
designed feature support. Cameras receiving the Action Command broadcast may have one or
multiple functions acting on that received command.
Please refer to the GigE Vision® Specification — version 2.0 RC6, for configuration and usage
details. Contact Teledyne DALSA Support and request example code for Action Command usage.
Nano Features supporting Action Command
Feature Category Feature Enum
I/O Control Trigger Selector Single Frame Trigger (Start)
MultiFrame Trigger (Start)
Trigger Source Action 1
Output Line Source Pulse On: Action 1
Pulse On: Action 2
Counter and Timer Control Counter Start Source Action 1
Action 2
Timer Start Source Action 1
Action 2