DMX 2400
www.dallmeier.com
17
7 Hard Disk Drives
The devices of the DMX series can be operated with multiple hard drives and a RAID
system. The procedure of a hard disk exchande differs for devices with or without RAID
system.
Proceed as described below, to replace a defective hard disk drive.
7.1
Identification
All hard disks are easily accessible on the front side of the device. First, the defective hard
disk drive must be identified. There are two options available for this purpose.
7.1.1
Information Dialogue
In the information dialogue of the device, comprehensive information about the current
status of the hard disk drives (HDDs) are displayed.
Open the
Info
dialogue via
System
>
Info
.
Select the
HDD Status
tab.
The
HDD Status
tab is displayed.
Fig. 7-1
•
Empty HDD holders are displayed in gray.
•
Active HDDs are displayed in green.
•
Defective HDDs are displayed in red.
•
Spare HDDs are displayed in yellow.
•
HDDs in the recovery process are displayed in orange.
Check the status of the hard disk drives.
Identify the defective hard disk drive.
