dallmeier PANOMERA W8, Пусконаладка

Страница: 18 / 48

W8
18 www.dallmeier.com
Formation of Condensation
Condensation forms mainly due to temperature or pressure fluctuations.
If the device is transported between locations with high temperature
differences, condensation may form on the outside of the housing as well
as inside the device. In this case, wait until the temperature of the device
will have slowly adapted to the ambient temperature prior to commis -
sioning.
Pressure Equalization Element
The device is equipped with a pressure equalization element.
Pressure equalization elements are used to prevent the formation of con -
densation in sealed enclosures, where humidity normally cannot escape
to the outside.
Pressure equalization element
Fig. 1
The built-in pressure equalization element of the device continuously
equalizes the internal pressure of the device to the ambient pressure.
Thus, the temperature and humidity difference between the housing
interior and the ambient air is balanced, and hence the formation of con -
densation is largely prevented.